Product ID:ENI-C1 TECHALLOY
MSDS Date:09/01/1989
FSC:3439
NIIN:00-262-2743
MSDS Number: BJXKC

TECHALLOY MARYLAND INC REID-AVERY DIVISION

2310 CHESAPEAKE AVE
BALTIMORE, MD 21222-4012
US

Emergency Phone: 301-633-9300 OR 800-638-1458

Cage: 59711

TECHALLOY COMPANY, INC.

BALTIMORE, MD 21222 US

Telephone: 410-633-9300; 800-638-1458

Cage: 59711

NICKEL (SARA III)

CAS: 7440-02-0

RTECS: QR5950000

Fraction By Weight: 40-70%

OSHA PEL 1 MG/M3

ACGIH TLV: 1 MG/M3; 9192

CHROMIUM (SARA III)

CAS: 7440-47-3

RTECS: GB4200000

Fraction By Weight: 0-15%

OSHA PEL 1 MG/M3

ACGIH TLV: 0.5 MG/M3; 9192

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

IRON

CAS: 7439-89-6

RTECS: NO4565500

Fraction By Weight: 0.5-10%

MANGANESE (SARA III)

CAS: 7439-96-5

RTECS: OO9275000

Fraction By Weight: 0.5-6%

OSHA PEL (C) 5 MG/M3 DUST

ACGIH TLV: 5 MG/M3 DUST 9293

MOLYBDENUM

CAS: 7439-98-7

RTECS: QA4680000

Fraction By Weight: 0-15%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3; 9293

NIOBIUM

CAS: 7440-03-1

Fraction By Weight: 0-5%

OSHA PEL 5 MG/CUM

ACGIH TLV: 5 MG/CUM

COPPER (SARA III)

CAS: 7440-50-8

RTECS: GL5325000

Fraction By Weight: 0-2%

OSHA PEL 0.1MG/M3 FUME/1 DUST

ACGIH TLV: 0.2MG/M3 FUME; 9192

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

SILICON

CAS: 7440-21-3

RTECS: VW0400000

Fraction By Weight: .1-1.0%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9293

TITANIUM, METAL

CAS: 7440-32-6

RTECS: XR1700000

Fraction By Weight: 0-2%

GRAPHITE, NATURAL

CAS: 7782-42-5

RTECS: MD9659600

Fraction By Weight: 0-3%

OSHA PEL 15 MPPCF RDUST

ACGIH TLV: 2 MG/M3 RDUST; 9293

CALCIUM CARBONATE (MARBLE) (LIMESTONE)

CAS: 1317-65-3

RTECS: EV9580000

Fraction By Weight: 5-10%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9192

CALCIUM FLUORIDE

CAS: 7789-75-5

RTECS: EW1760000

Fraction By Weight: 2-5%

OSHA PEL 2.5 MG(F)/CUM,8H TWA

ACGIH TLV: 2.5 MG(F)/CUM

STRONTIUM CARBONATE

CAS: 1633-05-2

Fraction By Weight: 0-15%

CRYOLITE

CAS: 15096-52-3

RTECS: WA9625000

Fraction By Weight: 2-5%

OSHA PEL 2 MG/CUM(F), TWA

ACGIH TLV: 2 MG/CUM(AL), TWA

POTASSIUM TITANATE

CAS: 12030-97-6

Fraction By Weight: 0-3%

TITANIUM DIOXIDE

CAS: 13463-67-7

RTECS: XR2275000

Fraction By Weight: 0-10%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9293

POTASSIUM SILICATE

CAS: 1312-76-1

Fraction By Weight: 0-2%

SODIUM SILICATE

CAS: 1344-09-8

Fraction By Weight: 1-5%

Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:SHORT TERM EXPOSURE TO WELDING FUMES,
GASES OR DUST MAY RESULT IN DISCOMFORT SUCH AS DIZZINESS, NAUSEA,
FEVER, DRYNESS AND/OR IRRITATION OF NOSE, THROAT AND EYES. SKIN
SENSITIVITY MAY ALSO BE NOTED. A CUTE EXPOSURE FROM SOME TOXIC
GASES MAYCAUSE PULMONARY EDEMA, ASPHYXIATION AND EXCESSIVE EXPOSURE
CAN BE FATAL.
Explanation of Carcinogenicity:NICKEL AND CHROMIUM ARE CONSIDERED
POSSIBLE CARCINOGENS UNDER NTP AND IARC.
Effects of Overexposure:EXPOSURE TO WELDING FUMES MAY RESULT IN
DISCOMFORT SUCH AS DIZZINESS, NAUSEA, FEVER, DRYNESS AND/OR
IRRITATION OF NOSE, THROAT AND EYES. SKIN SENSITIVITY MAY ALSO BE
NOTED. WATERY EYES, HEADACHE, BREA THING DIFFICULTY, FREQUENT
COUGHING AND/OR CHEST PAINS MAY OCCURE FROM ACUTE EXPOSURE. TOXIC
GASES CAN BE FATAL.
Medical Cond Aggravated by Exposure:NONE STATED.

First Aid:REMOVE TO FRESH AIR, OBTAIN MEDICAL ATTENTION. EMPLOY FIRST
AID TECHNIQUES RECOMMENDED BY AMERICAN RED CROSS.

Flash Point:NONE
Extinguishing Media:USE PROPER MEDIA FOR SURROUNDING FIRE.
Fire Fighting Procedures:WEAR SELF-CONTAINED BREATHING APPARATUS.
Unusual Fire/Explosion Hazard:WEDLING ARC AND SPARKS CAN IGNITE
COMBUSTIBLES AND FLAMMABLES.

Handling and Storage Precautions:WEAR GLOVES AND FLAME RETARDANT
CLOTHING WHEN CUTTING, GRINDING OR WELDING. DO NOT EXPOSE SKIN TO
RADIATION WHEN HOT CUTTING OR WELDING.
Other Precautions:USE EXHAUST SYSTEM TO CLEAR WELDING FUMES. MAKE SURE
THAT INHALED AIR DOES NOT CONTAIN FUME CONSTITUENTS ABOVE
PERMISSIBLE EXPOSURE LEVELS.

Respiratory Protection:USE WELD FUME RESPIRATOR OR AIR SUPPLIED
RESPIRATOR WHEN CUTTING, GRINDING OR WELDING IN A CONFINED SPACE OR
WHERE LOCAL EXHAUST OR GENERAL VENTILATION DOES NOT KEEP EXPOSURE
BELOW RECOMMENDED LIMITS. USE ONLY NIOSH APPROVED RESPIRATORS.
Ventilation:USE ENOUGH VENTILATION WHEN CUTTING, GRINDING OR WELDING TO
KEEP THE DUST, FUMES & GASES FROM THE WORKERS BREATHING ZONE
Protective Gloves:WELDERS LEATHER GLOVES
Eye Protection:OSHA APPROVED GOGGLES/FACE SHIELD W/LENS
Other Protective Equipment:FLAME RETARDANT CLOTHING WHEN CUTTING,
GRINDING OR WELDING. DO NOT EXPOSE SKIN TO RADIATION WHEN HOT
CUTTING OR WELDING.
Work Hygienic Practices:WASH THOROUGHLY BEFORE EATING OR SMOKING.
LAUNDER CONTAMINATIED CLOTHING BEFORE REUSE.
Supplemental Safety and Health

HCC:N1
Solubility in Water:INSOLUBLE
Appearance and Odor:SOLID ELECTRODE.
Percent Volatiles by Volume:0

Stability Indicator/Materials to Avoid:YES
NONE STATED.
Hazardous Decomposition Products:REASONABLY EXPECTED FUME CONSTITUENTS
INCLUDE OXIDES OF NICKEL, SECONDARY COMPLEX OXIDES OF
IRON,CHRMIUM,MANGANESE,ETC.

Waste Disposal Methods:PREVENT WASTE FROM CONTAMINATING SURROUNDING
ENVIRONMENT. DISCARD ANY PRODUCT RESIDUE, DISPOSABLE CONTAINER OR
LINER IN AN ENVIRONMENTALLY ACCEPTABLE MANNER. DISPOSE IN
ACCORDANCE WITH FEDERAL, STATE & LOCAL REGULATIONS

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.